DYMOT ENGINEERING COMPANY
11 Derrick Road
+27 11 970 1920
Copyright © Dymot Engineering Company
The DYMOT range of stage winches are based on our standard take-up winches and, as such, uses a drive train with a worm gear as the primary and an epicyclic type gear as the final drive.
The benefit of this drive train is its compactness and also the fact that high ratio worm type gears are not easily driven backwards by the load thus adding to the safety of the braking system. This in no way inhibits the reversibility of the winch.
The winches are fitted with dual brakes that function on the fail safe principal, one on the high speed side and the other on the low speed side. The low speed band brake doubles up as an emergency and parking brake. It is also fitted with a mechanical dial type position indicator and safety devices including an over speed device.
NOTE: These are DYMOT standard products, specials available on request.
|Useful Information on Winches|
|DYMOT Products in the World|
|Tension Control & Panels|
|Barge Positioning Winches|
|High Mast Winches|
|Lay On - Lay Off Winches|
|Belt Pulling Winches|
|DSB - Compact Rope Hoist|
|Endless Rope Systems|
|Motorised Hand Winches|
|Take-Up Winches with Overload Protection|
|Safety Hand Winches|
|300S Hand Winch|
|400S Hand Winch|
|Automatic Tension Control EGT DOL|
|Automatic Tension Control BTS VFD|
|Electrical Readout Panels|
|Loadcell Two Wire Loop Powered|
|Loadcell Four Wire Tensile Link|
|Battery Changing System|
|Conveyor Take-Up Trolley|
|Builders Hoist Winch MK1 - 500kg|
|Builders Hoist Winch MK2 - 1 TON|
|Gallery Braked Capstans|
|Gallery Project & Site|